Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
Igniter: Testing and Inspection
CHECK THAT SPARK OCCURS:
-
Disconnect the high-tension cords from the spark plugs.
-
Remove the spark plugs.
-
Install the spark plugs to each high-tension cord.
-
Ground the spark plug.
-
Check if spark occurs while engine is being cranked.
HINT: To prevent gasoline from being injected from injectors during this test, crank the engine for no more than 1 - 2 seconds at a time.
-
If the spark does not occur, perform the test above.