Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
/Page-1231001.png)
Seals and Gaskets: Service and Repair
If necessary, replace transfer adaptor oil seal.
a. Using a screwdriver, pry out the oil seal.
b. Using SST 09950-60010 (09951-00560), 09950-70010 (09951-07150) and a hammer, drive in a new oil seal.
Drive in depth: 45.5 ±0.5 mm (1.969 ±0.020 inch)