Tacoma 4WD L4-2.7L (2TR-FE) (2005)
2. REMOVE INSTRUMENT PANEL UNDER TRAY (PEDAL TYPE PARKING BRAKE)
3. REMOVE INSTRUMENT PANEL HOLE COVER (LEVER TYPE PARKING BRAKE)
4. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
5. REMOVE CONSOLE BOX ASSEMBLY REAR (SEPARATE SEAT TYPE)
6. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY (A/T TRANSMISSION, SEPARATE SEAT TYPE)
7. REMOVE CONSOLE BOX FRONT
8. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
9. REMOVE RADIO RECEIVER ASSEMBLY
10. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
11. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.1
12. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
13. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
14. REMOVE INSTRUMENT PANEL LOWER LH
15. REMOVE INSTRUMENT COVER SUB-ASSEMBLY LOWER
16. REMOVE CIGARETTE LIGHTER COVER
a. Disengage the 2 claws, and remove the cigarette lighter cover.
17. REMOVE CIGARETTE LIGHTER ASSEMBLY
a. Remove the cigarette lighter knob and element assembly.
b. Turn the socket counterclockwise as shown in the illustration, disengage the claw between the socket and cigarette lighter bezel stay, and push
the socket out towards the room side.
c. Align the socket with the notch on the cigarette lighter bezel stay, and remove the cigarette lighter assembly on the room side.
18. INSTALL CIGARETTE LIGHTER ASSEMBLY
a. Align the socket with the notch on the cigarette lighter bezel stay, and push the cigarette lighter assembly firmly into the cover to install it.
b. Install the cigarette lighter knob and element assembly.
19. INSTALL CIGARETTE LIGHTER COVER