Tacoma 4WD L4-2.7L (2TR-FE) (2005)
Air Bag Control Module: Component Tests and General Diagnostics
AIRBAG SENSOR ASSEMBLY CENTER (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check.
Refer to Air Bag Systems; Testing and Inspection.
AIRBAG SENSOR ASSEMBLY CENTER (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)
a. Perform a diagnostic system check.
Refer to Air Bag Systems; Testing and Inspection.
AIRBAG SENSOR ASSEMBLY CENTER (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
a. Replace the airbag sensor assembly center.
CAUTION: For removal and installation procedures of the airbag sensor assembly center, see "Replacement" and be sure to follow the correct
procedure.
HINT: The airbag sensor assembly center should be replaced after any of the airbags has deployed, as it has been subjected to an impact.