Tacoma 4WD L4-2.7L (2TR-FE) (2005)
/Page-899002.png)
f.
Turn SST 1-B, and remove SST 1-A and B.
g. Remove the generator pulley nut and generator pulley.
2. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY
a. Remove the nut and terminal insulator.
b. Remove the nut, screw and rectifier plate.
c. Remove the 2 nuts and rear end cover.
d. Remove the brush cover from the generator brush holder assembly.
e. Remove the 3 screws and generator brush holder assembly.
f.
Remove the plate seal.
3. REMOVE GENERATOR REGULATOR ASSEMBLY
a. Remove the 2 screws and generator regulator assembly.