Shift Cable, A/T Service and Repair
![background image](/toyota/tacoma_4wd/l4-2.7l_(2tr-fe)/Page-701001.png)
Shift Cable: Service and Repair
TRANSMISSION CONTROL CABLE ASSY (ATM)
REPLACEMENT
1. REMOVE SHIFT LEVER KNOB SUB-ASSY
2. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSY
3. REMOVE CONSOLE BOX ASSY REAR
4. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY
5. REMOVE CONSOLE BOX FRONT
6. REMOVE VOLTAGE INVERTER ASSY (W/ VOLTAGE INVERTER)
7. REMOVE TRANSMISSION CONTROL CABLE ASSY
a. Disconnect the transmission control cable assy from the shift lever assy.
b. Remove the clip and disconnect the transmission control cable.
c. Remove the 2 nuts and disconnect the transmission control cable assy from the body.
d. Remove the nut and disconnect the transmission control cable assy from the body.
e. Remove the clip and transmission control cable bracket.
f.
Remove the nut and transmission control cable assy.