Tacoma 4WD L4-2.7L (3RZ-FE) (2004)
Air Door Actuator / Motor: Testing and Inspection
Air Outlet Servomotor
AIR OUTLET SERVOMOTOR
INSPECTION
1. REMOVE LOWER LH FINISH PANEL
2. REMOVE AIR OUTLET SERVOMOTOR
a. Disconnect the servomotor connector.
b. Remove the 3 screws and servomotor.
3. INSPECT AIR OUTLET SERVOMOTOR
Inspect servomotor operation.
1. Connect the positive (+) lead from the battery to terminal 2 and negative (-) lead to terminal 1.
2. Check the lever operation when the negative (-) lead is connected to the terminals shown.
HINT: The lever moves smoothly to the position for each mode.