Tacoma 4WD L4-2.7L (3RZ-FE) (2004)
/Page-181002.png)
1. REMOVE BATTERY
a. Remove the bolt and battery clamp.
b. Remove the battery and battery carrier.
2. REMOVE FRONT AIRBAG SENSOR RH
a. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with the front airbag sensor installed.
b. Remove the 2 nuts and front airbag sensor RH.
3. REMOVE FRONT AIRBAG SENSOR LH
a. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with the front airbag sensor installed.
b. Remove the 2 bolts and front airbag sensor LH.
INSTALLATION
1. INSTALL FRONT AIRBAG SENSOR LH AND RH