Tacoma 4WD L4-2.7L (3RZ-FE) (2004)
Alternator: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE REAR END COVER
a. Remove the nut and terminal insulator.
b. Remove the 3 nuts, and end cover.
2. REMOVE BRUSH HOLDER AND VOLTAGE REGULATOR
Remove the 5 screws, bush holder and voltage regulator.
3. REMOVE RECTIFIER HOLDER
Remove the bolt, 4 screws and rectifier holder.
4. REMOVE PULLEY