Tacoma 4WD L4-2.7L (3RZ-FE) (2004)
/Page-924004.png)
b. Using a 29 mm socket wrench and press, slowly press in the rectifier end frame.
c. Install the 4 nuts.
Torque: 4.5 N.m (46 kgf.cm, 40 in.lbf)
4. INSTALL PULLEY
a. Install the pulley to the rotor shaft by tightening the pulley nut by hand.
b. Hold SST (A) with a torque wrench, and tighten SST (B) clockwise to the specified torque.
SST 09820-63010
Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)
c. Check that SST (A) is secured to the pulley shaft.
d. Mount SST (C) in a vise.
e. Install the generator to SST (C).