Tacoma 4WD L4-2.7L (3RZ-FE) (2004)
Steering Angle Sensor: Technical Service Bulletins
ABS/TCS - VSC Steering Angle Sensor Initialization
STEERING
ST005-04
Title:
VSC STEERING ANGLE SENSOR
INITIALIZATION DURING PDS OR
AFTER REPAIR
Models:
'04 RAV4, Tacoma & Tundra
September 9, 2004
Introduction
During the vehicle Pre-Delivery Service (PDS) or after a repair where the fuse or short pin has been removed, the VSC steering angle sensor must be
initialized/re-initialized.
Applicable Vehicles
^
2004 model year RAV4, Tacoma and Tundra vehicles.
Parts Information
Warranty Information
Initialization Procedure
Please perform the following procedure to ensure that the VSC steering angle sensor is correctly initialized.