Tacoma 4WD L4-2.7L (3RZ-FE) (2004)
7. 3RZ-FE, 5VZ-FE w/ Diff. lock: REMOVE FRONT BEARING OUTER RACE AND OIL STORAGE RING
a. Using SST, remove the front bearing outer race.
SST 09308-00010
b. Using a screwdriver, bend the oil storage ring and remove it.
8. REMOVE BEARING SPACER
a. 3RZ-FE, 5VZ-FE w/o Diff . lock: Remove the 2 washers.
b. Remove the bearing spacer.
9. INSTALL NEW BEARING SPACER
a. Install a new bearing spacer.
b. 3RZ-FE, 5VZ-FE w/o Diff. lock Install the 2 washers.
10. 3RZ-FE, 5VZ-FE w/ Diff lock: INSTALL OIL STORAGE RING AND FRONT BEARING OUTER RACE
a. Using SST and a hammer, install a new oil storage ring.
SST 09316-60011 (09316-00011, 09316-00021)
b. Using SST and a hammer, install the front bearing outer race.
SST 09316-60011 (09316-00011, 09316-00021)
11. INSTALL FRONT BEARING
a. Place the front bearing.
b. Except 3RZ-FE, 5VZ-FE w/o Diff. lock: Place the oil slinger.
c. Using SST and the companion flange, install the front bearing then remove the companion flange.
SST 09950-30012 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03020, 09956-03050)
12. INSTALL NEW OIL SEAL