Tacoma 4WD V6-3.4L (5VZ-FE) (1995)
/Page-304001.png)
Connecting Rod: Testing and Inspection
Connecting Rod Alignment
USING A ROD ALIGNER AND THICKNESS GAUGE, CHECK THE CONNECTING ROD ALIGNMENT
1. Check for bend.
Maximum bend: 0.05 mm (0.0020 inch) per 100 mm (3.94 inch)
If bend is greater than maximum, replace the connecting rod assembly.
2. Check for twist.
Maximum twist: 0.15 mm (0.0059 inch) per 100 mm (3.94 inch)
If twist is greater than maximum, replace the connecting rod assembly.