Tacoma 4WD V6-3.4L (5VZ-FE) (1995)
/Page-1395002.png)
(b) If replacing the shock absorber, remove the nut, retainers and cushions, holding the shock absorber to the frame, and remove the shock
absorber.
4. DISCONNECT STABILIZER BAR BRACKETS
Remove the bolts holding the stabilizer bar bracket to the rear axle housing.
5. DISCONNECT LATERAL CONTROL ROD FROM FRAME
(a) Remove the bolt holding the RH shock absorber to the rear axle housing and disconnect the shock absorber.
(b) Remove the 2 bolts and disconnect the shackle bracket from the lateral control rod.
(c) Remove the nut, washer and bolt from the frame and disconnect the lateral control rod.