Tacoma 4WD V6-3.4L (5VZ-FE) (1995)
b. Using a hammer handle, remove the actuator.
2. Remove differential tube.
W/ A.D.D.:
a. Remove the 4 torx bolts. Torx socket E14 (Part No. 09044-00010 or locally manufactured tool)
b. Using a plastic hammer, tap on the differential tube to remove it.
c. Remove the sleeve.
d. Remove the O-ring from the differential tube.
W/O A.D.D.:
a. Remove the 4 bolts.
b. Using a plastic hammer, tap on the differential tube to remove it.
3. W/ A.D.D.: Remove clutch case.
a. Remove the 2 torx bolts. Torx socket E14 (Part No.09044 - 00010 or locally manufactured tool)
b. Using a plastic hammer, tap on the clutch case to remove it.
4. Remove side oil seal. Using SST 09308-00010, remove the side oil seal.
5. W/ A.D.D.: Remove intermediate shaft No. 1. Using SST 09350-20015, 09950-40010 (09951-04010, 09952-04010, 09953-04020, 09954-04010,
09955-04010, 09957-04010, 09958-04010), remove the intermediate shaft No. 1.
6. Remove companion flange.