Tacoma 4WD V6-3.4L (5VZ-FE) (1995)
![background image](/toyota/tacoma_4wd/v6-3.4l_(5vz-fe)/Page-1218001.png)
Gear Sensor/Switch: Adjustments
Fig. 3 Transfer Indicator Switch Adjustment
Transfer Position Switch
1.
Loosen transfer position switch bolt, then place switch in ``L4'' position.
2.
Disconnect electrical connector, then connect a suitable ohmmeter between terminals, Fig. 3
3.
Adjust switch until there is no continuity between terminals.
4.
Connect electrical connector, then torque bolt to 48 inch lbs.
5.
Ensure proper idle RPM.