toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Starter Motor|Removal and Installation|Page 4610 > < Starter Motor|Removal and Installation|Page 4608
Page 3
background image

REMOVE STARTER

a. Disconnect the starter connector.
b. Remove the nut and disconnect the starter wire.

Torque: 8.8 Nm (90 kg.cm, 78 in.lb)

c. Remove the 2 bolts and starter.

Torque: 39 Nm (400 kg.cm, 29 ft.lb)

INSTALLATION

Installation is in the reverse order of removal.

Starter Motor|Removal and Installation|Page 4610 > < Starter Motor|Removal and Installation|Page 4608