Tacoma Extra Cab 2WD V6-3.4L (5VZ-FE) (1998)
Brake Pad: Service and Repair
REPLACEMENT
1. Remove front wheel.
2. Inspect pad lining thickness.
Check the pad thickness through the caliper inspection hole and replace pads if not within specification.
Minimum thickness: 1.0 mm (0.039 inch)
3. Lift up caliper.
a. Remove the slide pin.
b. Lift up the caliper and suspend it securely.
HINT: Do not disconnect the flexible hose from the caliper.
4. Remove these parts:
-
2 brake pads
-
4 anti-squeal shims
-
Pad wear indicator plate