Tacoma Extra Cab 2WD V6-3.4L (5VZ-FE) (1998)
21. REMOVE RH CAMSHAFT TIMING PULLEY
a. Using SST, loosen the pulley bolt.
SST 09960-10010 (09962-01000, 09963-01000)
b. Remove the bolt, knock pin and camshaft timing pulley with timing belt.
22. REMOVE LH CAMSHAFT TIMING PULLEY
a. Using SST, loosen the pulley bolt.
SST 09960-10010 (09962-01000, 09963-01000)
b. Remove the bolt, knock pin and camshaft timing pulley.
23. REMOVE NO.2 IDLER PULLEY
Remove the bolt and No.2 idler pulley.
24. REMOVE NO.1 IDLER PULLEY
Using a 10 mm hexagon wrench, remove the pivot bolt, No.1 idler pulley and plate washer.
25. REMOVE CRANKSHAFT TIMING PULLEY
Remove crankshaft timing pulley.
HINT: If the pulley cannot be removed by hand, use SST and service bolt to remove the crankshaft timing pulley.
SST 09950-50010 (09951-05010, 09952-05010, 09953-05020, 09954-05010)