Tacoma Extra Cab 2WD V6-3.4L (5VZ-FE) (1998)
c. Using SST, install the pulley bolt.
SST 09960-10010 (09962-01000, 09963-01000)
Torque: 110 Nm (81 ft. lbs.)
6. SET NO.1 CYLINDER TO TOP DEAD CENTER (TDC)/COMPRESSION
a. Crankshaft Timing Pulley Position:
-
Temporarily install the crankshaft pulley bolt to the crankshaft.
-
Turn the crankshaft, and align the timing marks of the crankshaft timing pulley and oil pump body.
b. Camshaft Timing Pulley Positions: Using SST, turn the camshaft pulley, align the timing marks of the timing pulley and No.3 timing belt
cover.
SST 09960-10010 (09962-01000, 09963-01000)
7. INSTALL TIMING BELT
NOTICE: The engine should be cold.
a. Remove any oil or water on the pulleys, and keep them clean.
NOTICE: Only wipe the pulleys; do not use any cleansing agent.