Tacoma Extra Cab 2WD V6-3.4L (5VZ-FE) (1998)
![background image](/toyota/tacoma_extra_cab_2wd/v6-3.4l_(5vz-fe)/Page-1409004.png)
a. Terminal 30:
Install these new parts:
1. Insulation paper
2. Terminal insulator (inside)
NOTE: Be careful to install the terminal insulator in the correct direction.
3. Contact plate
4. Terminal bolt
5. O-ring
6. Packing and terminal insulator (outside)
Install the packing to the terminal insulator, and install them.
HINT: Match the protrusion of the insulator with the indentation of the housing.
7. Wave washer
8. Terminal nut
b. Terminal C:
Install these new parts:
1. Terminal insulator (inside)
2. Contact plate
3. Terminal bolt
4. O-ring
5. Terminal insulator (outside)
6. Wave washer
7. Terminal nut
NOTE: Be careful to install the terminal insulator (inside) in the correct direction.
c. Temporarily tighten the terminal nuts.
5. TIGHTEN TERMINAL NUT