Tacoma Extra Cab 2WD V6-3.4L (5VZ-FE) (1998)
c. Disconnect the throttle cable from the cam.
d. Remove the valve body.
NOTICE: Be careful not to drop the check ball body and spring.
9. REMOVE SHIFT SOLENOID VALVE
a. Remove the solenoid valve mounting bolts.
b. Remove the 3 solenoid valves.
c. Remove the 3 O-rings from the solenoid valves.
10. INSTALL SHIFT SOLENOID VALVE
a. Coat the 3 new O-rings with ATF.
b. Install the 3 O-rings to the shift solenoid valves.
c. Install the 3 shift solenoid valves with the 3 bolts.
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
11. INSTALL VALVE BODY
a. Align the groove of the manual valve to the pin of the lever.
b. Connect the throttle cable to the cam.