Tacoma Extra Cab 2WD V6-3.4L (5VZ-FE) (1998)
R = Red
V = Violet
W = White
Y = Yellow
The first letter indicates the basic wire color and the second letter indicates the color of the stripe.
Splice Point
K: Indicates a wiring Splice Point (Codes are "E", for the Engine Room, "I" for the Instrument Panel, and "B" for the Body).
The Location of Splice Point I 5 is indicated by the shaded section.
L: Page No.
M: Indicates a shielded cable.
N: Indicates a ground point.
The first letter of the code for each ground point(s) indicates the components location, e.g, E for the Engine Compartment, "I" for the Instrument
Panel and Surrounding area, and "B" for the Body and Surrounding area.
Pin Number Of The Connector
O: Indicates the pin number of the connector.
The numbering system is different for female and male connectors.
Example: Numbered in order
Numbered in order
from upper left to
from upper right to
lower right
lower left
P: When 2 parts both use one connector in common, the parts connector name used in the wire routing section is shown in square brackets [ ].