Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
(c)
Remove the 9 bolts and 2 nuts.
(d) Using a plastic faced hammer, loosen the chain cover and remove the timing chain cover and 3 gasket.
14. Remove No. 1 timing chain and camshaft timing gear.
15. Remove crankshaft timing gear.
NOTE: If necessary, remove the gear with SST Puller B Set # O9950 - 40010 (Hanger 150 # 09951 - 04010, slide Arm # 09952 - 04010, Center
Bolt 100 # 09953 - 04010, Arm 25 # 09954 - 0401O, Claw No. 6 # O9955 - 04060) or equivalents and crankshaft pulley bolt.
16. Remove No. 1 timing chain tensioner slipper and No. 1 vibration damper.
(a)
Remove the bolt and slipper.
(b) Remove the bolt, nut and No. 1 damper.
17. Remove No. 2, No. 3 vibration dampers and No. 2 chain tensioner.