Tacoma Extra Cab 4WD V6-3.4L (5VZ-FE) (1998)
Brake Caliper: Service and Repair
Removal and Installation
REMOVAL
1. Remove front wheel.
2. Disconnect flexible hose.
Remove the union bolt and 2 gaskets from the caliper, then disconnect the flexible hose from the caliper.
Torque: 30 Nm (22 ft. lbs.)
HINT: At the time of installation, install the flexible hose lock securely in the lock hole in the caliper.
3. Remove caliper.
Remove the 2 mounting bolts and caliper.
Torque: 123 Nm (90 ft. lbs.)