toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 3271 > < Diagram Information and Instructions|Page 3269
Page 2
background image

SST 09842-30070

Volume:
56 - 69 cu.cm (3.4 - 4.2 cu in.) per 15 sec. 
Difference between each injector: 6 cu.cm (0.4 cu in.) or less

If the ignition volume is not as specified, replace the injector.

3. INSPECT LEAKAGE

(a) In the condition above, disconnect the test probes of SST (wire) from the battery and check the fuel leakage from the injector.

SST 09842-30070

Fuel drop:
1 drop or less per minute

(b) Turn the ignition switch to LOCK.
(c) Disconnect the negative (-) terminal cable from the battery.
(d) Remove SST

SST0O9268-41045 

(e) Disconnect the TOYOTA hand-held tester from the DLC3.

Diagram Information and Instructions|Page 3271 > < Diagram Information and Instructions|Page 3269