Tacoma Extra Cab 4WD V6-3.4L (5VZ-FE) (1998)
4. REMOVE RH AND LH RACK ENDS AND CLAW WASHERS.
a. Using a screwdriver and hammer, unstake the washer.
NOTICE: Avoid any impact to the steering rack.
b. Using a spanner to hold the steering rack steady, and using SST 09922-10010, remove the rack end.
NOTICE: Use SST 09922-10010 in the direction shown in the illustration. Mark the RH and LH rack ends.
5. REMOVE RACK HOUSING NO. 2 BRACKET AND GROMMET.
a. Place matchmarks on the bracket and rack housing.
b. Remove the bolt.
6. REMOVE RACK GUIDE SPRING CAP LOCK NUT.
Using SST 09922-10010, remove the nut.
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.