Tacoma Extra Cab 4WD V6-3.4L (5VZ-FE) (1998)
NOTICE: Be careful not to grip the propeller shaft tube too tightly in a vise as this will cause deformation.
HINT: When replacing the propeller shaft, install the new parts facing, as shown in the illustration.
1. 3-JOINT TYPE:
INSTALL CENTER SUPPORT BEARING ON INTERMEDIATE SHAFT
Install the center support bearing and spacer.
HINT: Install the center support bearing with the cutout toward the rear.
2. 3-JOINT TYPE:
INSTALL FLANGE ON INTERMEDIATE SHAFT