Tacoma Extra Cab 4WD V6-3.4L (5VZ-FE) (1998)
![background image](/toyota/tacoma_extra_cab_4wd/v6-3.4l_(5vz-fe)/Page-1192007.png)
f.
To assemble the other boot clamps, pinch the clamps and adjust clearance with Special Service Tool (SST) 09240-00020 or equivalent.
NOTICE: Do not overtighten the SST 09521-24010.
g. Measure the clearance of the boot clamps with .
Clearance: 1.0 - 1.5 mm (0.039 - 0.059 inch)
8. Check drive shaft.