Tacoma Extra Cab 4WD V6-3.4L (5VZ-FE) (1998)
![background image](/toyota/tacoma_extra_cab_4wd/v6-3.4l_(5vz-fe)/Page-1327001.png)
Transmission Position Switch/Sensor: Service and Repair
ON-VEHICLE REPAIR
1
DISCONNECT 2 OIL COOLER PIPES
2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
a. Pry off the lock washer and remove the nut.
b. Remove the bolt and pull out the park/neutral position switch.
3. INSTALL AND ADJUST PARK/NEUTRAL POSITION SWITCH
4. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
5. CONNECT 2 OIL COOLER PIPES