Tacoma Extra Cab Limited 4WD V6-3.4L (5VZ-FE) (2000)
/Page-1450001.png)
Hazard Warning Flasher: Testing and Inspection
Turn Signal And Hazard Warning System
INSPECT TURN SIGNAL FLASHER OPERATION
a. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 3.
b. Connect the 2 turn signal light bulbs parallel to each other to terminals 1 and 3, check that the bulbs flash.
HINT: The turn signal lights should flash 60 or 120 times per minute. If one of the front or rear turn signal lights has an open circuit, the
number of flashers will be more than 140 per minute.
If operation is not as specified, replace the flasher.
