toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Customer Interest: > < Body - Front Fender Liner Pin Hold Clip Procedure|Page 6304
Page 1
background image

Skid Plate: All Technical Service Bulletins
Body/Frame - Skid Plate Vibration

ACCESSORIES
AX004-05

July 20, 2005

Title:
SKID PLATE VIBRATION

Models:
'05 Tacoma

Introduction 

A low frequency vehicle vibration may occur at speeds above 65 mph on 2005 model year Tacoma vehicles equipped with the Toyota Accessory Skid
Plate. The Skid Plate may be the cause of the vibration.

To identify potentially affected Skid Plates, refer to the illustrations shown. New Skid Plates with reinforcement brackets (P/N PT212-35051) are now
available to improve this condition.

Applicable Vehicles:
^

2005 model year Tacoma vehicles. 

Parts Information

Repair Procedure

Remove and replace the original Skid Plate with the new part (P/N PT212-35051) to correct the condition. Return all "new stock" of the previous part
(P/N PT21 2-35050) to your facing PDC.

Warranty Information

Applicable Warranty:

This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Customer Interest: > < Body - Front Fender Liner Pin Hold Clip Procedure|Page 6304