Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
![background image](/toyota/tacoma_prerunner/l4-2.7l_(2tr-fe)/Page-1263002.png)
a. Disengage the 7 claws and remove the rear door scuff plate.
10. REMOVE REAR DOOR SCUFF PLATE RH
HINT: Follow the same procedures as for the rear door scuff plate LH.
11. REMOVE ROOF SIDE INNER GARNISH CAP LH
a. Using a screwdriver with its tip taped in protective tape, disengage the 2 claws and remove the roof side inner garnish cover.
HINT: Follow the same procedures as for the opposite side.
b. Using a Torx(R) socket wrench T30, remove the 2 screws.
c. Disengage the 4 claws and remove the roof side inner garnish cap.
12. REMOVE ROOF SIDE INNER GARNISH CAP RH
HINT: Follow the same procedures as for the roof side inner garnish cap LH.
13. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH