Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
/Page-1341001.png)
Air Bag Deactivation Indicator: Testing and Inspection
INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY
a. Check the switch illumination.
1. Connect the battery positive (+) lead to terminal 3 and the battery negative (-) lead to terminal 12.
2. Check that the passenger airbag ON indicator light up.
If the operation is not as specified, replace the hazard warning signal switch assembly.
3. Connect the battery positive (+) lead to terminal 3 and the battery negative (-) lead to terminal 5.
4. Check that the passenger airbag OFF indicator light up.
If the operation is not as specified, replace the hazard warning signal switch assembly.