Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
/Page-223001.png)
Drive Belt: Service and Repair
FAN AND GENERATOR V BELT (2TR-FE)
REPLACEMENT
1. REMOVE FAN AND GENERATOR V BELT
a. Turning the hexagonal bolt on the V-ribbed belt tensioner clockwise, loosen and then remove the V belt.
2. INSTALL FAN AND GENERATOR V BELT
a. Provisionally install the V belt onto each pulley.
NOTICE: Install the V belt onto each pulley and finally install the V belt onto the V-ribbed belt tensioner.
b. Turn the hexagonal bolt on the V-ribbed belt tensioner clockwise and install the V belt onto the V-ribbed belt tensioner pulley.
3. INSPECT FAN AND GENERATOR V BELT
