Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
Fuel Pressure: Testing and Inspection
ON-VEHICLE INSPECTION
1. CHECK FUEL PUMP
a. Connect the hand-held tester to the DLC3.
b. Turn the ignition switch to ON.
NOTE: Do not start the engine.
c. Turn the hand-held tester ON.
d. Select the following menu items: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / FUEL PUMP / SPD.
e. Check the fuel operation by operating it with the hand-held tester.
If the fuel pump does not operate, replace the fuel pump.
2. CHECK FUEL PRESSURE
a. Discharge the fuel system pressure.
b. Using a voltmeter, measure the battery voltage.
Standard: 9.0 to 14 V
c. Disconnect the cable from the negative battery terminal.
d. Remove the fuel pipe clamp.
e. Disconnect the fuel hose.
f.
Install SST into the vehicle.
SST 09268- 41048 (09268- 41500, 90467- 13001, 95336- 08070), 09268- 45014 (09268- 41200, 09268-41220, 09268-41250, 90467-13001)