Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
a. Install a new gasket onto the intake manifold.
b. Install the intake manifold with the 5 bolts and 2 nuts.
Torque: 25 N.m (255 kgf.cm, 18 ft.lbf)
c. Connect the engine wire harness to the relay block.
d. Install the nut shown in the illustration.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
e. Connect the 3 connectors.
f.
Install the harness clamp bracket with the bolt.
Torque: 8.2 N.m (84 kgf.cm, 73 in.lbf)
g. Engage the wire harness clamp.
h. Connect the compressor magnetic clutch connector.