Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
a. Install the exhaust manifold heat insulator No.1 with the 5 bolts.
Torque: 12 N.m (122 Kgf.cm, 9 ft.lbf)
12. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
a. Install the air cleaner cap together with the air cleaner hose No.1.
b. Connect the 2 air cleaner clamps.
c. Tighten the hose clamp bolt, then connect the air cleaner hose No.1.
d. Connect the wire harness clamp.
e. Connect the mass air flow meter connector.
13. INSTALL INTAKE AIR CONNECTOR
14. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 Kgf.cm, 35 in.lbf)