Tacoma PreRunner L4-2.7L (3RZ-FE) (2004)
d. Install the teflon rings to the control valve assembly, and settle them down with your fingers.
e. Carefully slide the tapered end of SST over the teflon rings until the ring fits to the steering rack.
SST 09631-20081
NOTICE: Be careful not to damage the rings.
10. IF NECESSARY, REPLACE UNION SEATS
a. Using a screw extractor, remove the 2 union seats from the control valve housing.
b. Using a plastic hammer and sliding handle, lightly tap in 2 new union seats.
NOTICE: Before installing the union seat, remove dust sticking to the control valve housing.
REASSEMBLY
NOTICE: When using a vise, do not overtighten it.
1. COAT PARTS INDICATED BY ARROWS WITH POWER STEERING FLUID OR MOLYBDENUM DISULFIDE LITHIUM BASE
GREASE
2. INSTALL SPACER AND OIL SEAL
a. Coat a new oil seal lip with power steering fluid.
b. Using SST, press in the oil seal and spacer.