Tacoma PreRunner 2WD V6-3.4L (5VZ-FE) (2003)
/Page-826003.png)
5. SET VALVE BODY
a. When pulling down the load sensing spring, confirm that the valve piston moves down smoothly.
b. Position the valve body so that the valve piston lightly contacts the load sensing spring.
c. Tighten the valve body mounting nuts.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
6. BLEED BRAKE LINE
7. CHECK AND ADJUST LSP & BV FLUID PRESSURE