Tacoma PreRunner 2WD V6-3.4L (5VZ-FE) (2003)
22. REMOVE LH CAMSHAFT TIMING PULLEY
a. Using SST, loosen the pulley bolt
SST 09960-10010 (09962-01010 09963-01000)
b. Remove the bolt, knock pin and timing pulley
23. REMOVE NO.2 IDLER PULLEY
Remove the bolt and idler pulley.
24. REMOVE NO.1 IDLER PULLET
Using a 10 mm hexagon wrench, remove the pivot bolt idler pulley and plate washer.
25. REMOVE CRANKSHAFT TIMING PULL E Y
Remove the timing pulley.
HINT: If the pulley cannot be removed by hand use SST and a service bolt to remove the timing pulley.
SST 09950-50011 (09951-05010, 09953-05020, 09954-05011)
INSPECTION
1. INSPECT TIMING BELT
NOTICE:
-
Do not bend, twist or turn the timing belt inside out.
-
Do not allow the timing belt to come into contact with oil, water or steam.