Tacoma PreRunner 2WD V6-3.4L (5VZ-FE) (2003)
![background image](/toyota/tacoma_prerunner_2wd/v6-3.4l_(5vz-fe)/Page-1098006.png)
1. VEHICLES NOT INVOLVED IN COLLISION
Do a diagnostic system check. *
2. VEHICLES INVOLVED IN COLLISION
a. Do a diagnostic system check. *
b. If the front fender of the car or its periphery is damaged, do a visual check for damage to the front airbag sensor, which includes the following
items even if the airbag was not deployed:
-
Bracket deformation
-
Paint peeling off the bracket
-
Cracks, dents or chips in the case
-
Cracks, dents, chipping and scratches in the connector
-
Peeling off of the label or damage to the serial number
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
REPLACEMENT
In the following cases, replace the front airbag sensor.
-
If the SRS has been deployed in a collision. (Replace both the left and right airbag sensors.)
-
If the front airbag sensor has been found to be faulty in troubleshooting.
-
If the front airbag sensor has been found to be faulty during checking items.
-
If the front airbag sensor has been dropped.
CAUTION: Be sure to follow the correct procedure, for removal and installation of the front airbag sensor.