Tacoma PreRunner 2WD V6-3.4L (5VZ-FE) (2003)
/Page-895002.png)
Repair Procedure
1.
Disconnect Negative Battery Terminal.
2.
Disconnect Engine No. 2 Wire Harness (Under Hood).
A.
Remove the bolt, and disconnect the ground strap.
B.
Remove the nut, and disconnect the wire from the relay block No. 2.
HINT:
Push upward on the clamp to remove it.
C.
Remove the nut, and disconnect the 2 wires from the positive (+) terminal.