toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Engine Controls/Electrical - Intermittent Hard Start|Page 3685 > < Engine Controls/Electrical - Intermittent Hard Start|Page 3683
Page 4
background image

3.

Remove Left Front Tire.

4.

Remove Front Fender Apron Seal.

A.

Remove the 12 clips and the front fender apron seal.

5.

Remove Engine Under Cover.

6.

Remove Engine No. 2 Wire (Access from Underside of Vehicle).

A.

Remove the bolt, and disconnect the ground strap.

B.

Disconnect the starter connector.

C.

Remove the nut, and disconnect the starter wire.

Engine Controls/Electrical - Intermittent Hard Start|Page 3685 > < Engine Controls/Electrical - Intermittent Hard Start|Page 3683