Tacoma PreRunner 2WD V6-3.4L (5VZ-FE) (2003)
![background image](/toyota/tacoma_prerunner_2wd/v6-3.4l_(5vz-fe)/Page-976010.png)
a. Using a screwdriver, remove the teflon ring and O-ring from the steering rack.
NOTICE: Be careful not to damage the groove for the ring.
b. Coat a new O-ring with power steering fluid and install it.
c. Expand a new teflon ring with your fingers.
NOTICE: Be careful not to over expand the ring.
d. Coat the teflon ring with power steering fluid.
e. Install the teflon ring to the rack, and settle it down with your fingers.
9. IF NECESSARY, REPLACE TEFLON RINGS
a. Using a screwdriver, remove the 4 teflon rings from the control valve assembly.
NOTICE: Be careful not to damage the grooves for the teflon ring.
b. Expand 4 new teflon rings with your fingers.
NOTICE: Be careful not to over expand the teflon ring.
c. Coat the teflon rings with power steering fluid.