toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Universal Joint, Drive/Propeller Shaft|Service and Repair|Page 3112 > < Universal Joint, Drive/Propeller Shaft|Service and Repair|Page 3110
Page 3
background image

d. Using SST, install new bearings on the spider.

SST 09332-25010

e. Using SST, adjust both bearings so that the snap ring grooves are at maximum and equal widths.

7. INSTALL SNAP RING

a. Install 2 new snap rings of equal thickness which will allow 0 - 0.05 mm (0 - 0.0020 inch) axial play.

HINT:  Do not reuse the snap rings.

TMC made 

Universal Joint, Drive/Propeller Shaft|Service and Repair|Page 3112 > < Universal Joint, Drive/Propeller Shaft|Service and Repair|Page 3110