Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
d. Using a screwdriver, remove the lower center pillar garnish.
e. Using a screwdriver, remove the screw, upper center pillar garnish.
10. REMOVE REAR QUARTER GARNISHES
a. Disconnect the rear outer seat belt.
1. Using a screwdriver, open the cover and remove the 2 bolts.
2. Disconnect the seat belt from the garnish.
b. Using a screwdriver, remove the back panel upper garnish.
c. Using a screwdriver, remove the rear quarter garnish.
11. REMOVE MAP LAMP AND MIRROR