Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
/Page-781003.png)
3. RAISE FRONT BRAKE PRESSURE TO 7,845 kPa (80 kgf/cm2, 1,138 psi) AND CHECK REAR BRAKE PRESSURE
Rear brake pressure:
HINT:
The brake pedal should not be depressed twice and/or returned while setting to the specified pressure. Read the value of rear brake pressure 2
seconds after adjusting the specified fluid pressure. If the brake pressure is incorrect, adjust the fluid pressure.
4. IF NECESSARY, ADJUST FLUID PRESSURE
(a) Adjust the length of the No. 2 shackle.
Low pressure - Lengthen A
High pressure - Shorten A
Initial set:
Adjustment range:
HINT: One turn of the nut changes the fluid pressure as shown in the following table.
Rear brake pressure:
