toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brake Caliper|Removal and Installation|Page 2822 > < Brake Caliper|Removal and Installation
Page 2
background image

3. REMOVE CALIPER

Remove the 2 mounting bolts and caliper.
Torque: 123 Nm (1,250 kgf-cm, 90 ft. lbs.) 

4. REMOVE CLIP, 2 PINS AND ANTI-RATTLE SPRING
5. REMOVE 2 PADS WITH 4 ANTI-SQUEAL SHIMS

INSTALLATION 

Installation is in the reverse order of removal.

HINT:  After installation, fill the brake reservoir with brake fluid, bleed brake system and check for leaks.

Brake Caliper|Removal and Installation|Page 2822 > < Brake Caliper|Removal and Installation