Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
Heater Control Valve: Service and Repair
WATER VALVE
REMOVAL
1. DRAIN ENGINE COOLANT FROM RADIATOR
HINT: It is not necessary to drain out all the coolant.
2. DISCONNECT WATER VALVE CONTROL CABLE FROM WATER VALVE
HINT: At the time of installation, please refer to the following item
For installing the control cable, refer to "INSTALLATION" of HEATER CONTROL ASSEMBLY.
3. DISCONNECT WATER HOSES
a. Using pliers, grip the claws of the clip and slide the clip along the hose.
b. Disconnect the water hose.
HINT: At the time of installation, please refer to the following item.
Install the hose clip in the position, as shown in the illustration.